The height of the legs/pedestals is dictated by the volume of cables and other services provided beneath, but typically arranged for a clearance of at least six inches or 15 cm.

CCG offers a variety of pedestals solutions to complete your access floors. CCg  Access  system  is  not  complete  without  its primary structural support system, the under-structure. CCg Access System’s  under-structure configurations allow  for  the  ultimate  flexibility  in  design.  CCg under-structure  accommodates  all  steel  core panels.

VOSS Pedestals – V1

• - Low Finish Flooring Height from 65mm – 150mm
• - Field Pedestal
• - CSA Series Panels
• - Bare Panels
• - Stringers or with S1 Stringers
• - Expansion gasket
• - In-built acoustic and vibration reduction system

VOSS Pedestals – V2

• Low Finish Flooring Height from 65mm – 150mm
• Field & Perimeter Pedestal
• CSA Series Panels
• Factory Finished or Bare Panels
• Stringers or with S2 Stringers
• Expansion gasket

VOSS Pedestals – V3

• Standard finish – flooring height from 150mm – 600mm
• Field Pedestal
• CSA Series Panels
• Bare Panels
• Stringers or with S1 Stringers
• Expansion gasket
• In-built acoustic and vibration reduction system
• In-built locking system

VOSS Pedestals – V4

• Standard finish – flooring height from 150mm – 600mm
• Field & Perimeter Pedestal
• CSA Series Panels
• Factory Finished or Bare Panels
• Stringers or with S2 Stringers
• Expansion gasket
• In-built locking system

VOSS Pedestals – V5

• Standard finish – flooring height from 300mm – 1200mm
• Field & Perimeter Pedestal
• CSA, CS, WC, FEWC, FECS-Series Panels
• Factory Finished or Bare Panels
• S2 Stringers or S3 Stringers
• Expansion gasket

VOSS Pedestals – V6

• High Finish Flooring Height from 1200mm – 1800mm
• Field & Perimeter Pedestal
• CSA, CS, WC, FEWC, FECS-Series Panels
• Factory Finished or Bare Panels
• S3 Stringers
• Expansion gasket

VOSS Pedestals – V7

• Extra-high – finish flooring height up to 2600mm
• Field & perimeter pedestal
• CSA, CS, WC, FEWC, FECS series panels
• Factory finish or bare Panels
• S3 Stringers
• Expansion gasket
• 1, 2 or 4 supporting bracing kits also available.